![](https://em-metalworks.com/wp-content/uploads/2023/04/EM-6894.png)
Antenna, Vertical
EM-6894 | 9 kHz – 30 MHz
Electro-Metrics EM-6894 Manual Vertical (Rod) Antenna performs electric field measurements from 9 kHz to 30 MHz. A ten position rotary switch switches in the appropriate matching network for the frequency selected. The EM-6894 can be used with any equivalent 50-ohm receiver/analyzer designed and calibrated for use in a 50-ohm system.
The EM-6894 is used in conjunction with the following accessories:
- EM-6889 Counterpoise
- EM-6136 Tripod
- EM-1312 Coaxial Cable
The bottom of the base has a 5/8 – 20 threaded receptacle for mounting to the EM- 3136 Tripod.
Applications
The EM-6894 Vertical Antenna uses passive circuits to transform electric field components to voltages between 9 kHz to 30 MHz.
The EM-6894 is used for military EMI specification compliance testing in accordance with MIL-STD-826A, MIL-STD- 461/462, and high voltage power line interference. Calibration data is supplied with each antenna.
NOTE: Though designed as a receiving antenna, the EM 6894 can be used as a transmitting antenna PROVIDED the power applied to the antenna DOES NOT exceed 1W maximum
Specifications
Electrical
Frequency Range (calibrated): 9kHz – 30 MHz
(Antenna Factor chart furnished with antenna.)
Input Impedance: Matched to 50 Ohms
Connector: Type TNC, female
Mechanical
Length: 232 mm (9.125”)
Width: 181 mm (7.125”)
Height: 108 mm (4.25”)
Antenna Rod Length: 104.1 cm (41”)
Weight: 3.5 kg (7.5 lbs.)